High Purity 5000 Nm3 / h gas liquefaction process Low pressure YPO manufacturer from China Hangzhou Hangyang Cryogenic Liquefaction Equipment Co., Ltd

High Purity 5000 Nm3 / h gas liquefaction process Low pressure

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: YPO

Gas Liquefaction Plant 5000 Nm3/h Y

Gas Liquefaction Plant 5000 Nm3/h YPO-5000 Liquefaction Oxygen Equipment

Specifications:

The followings are the standard products for the Liquefaction Oxygen Equipment YPO series which are manufactured by our company. Regarding other particular product can be calculated and designed according to the actual requirements.

MODEL CONTENTS		YPO-2000	YPO-2500	YPO-3600	YPO-4500	YPO-10000
LOX flow	Nm³/h	2000	2500	3600	4500	10000
LOX purity	ppm	Same as the feed air	Same as the feed air	Same as the feed air	Same as the feed air	Same as the feed air
LOX pressure	MPa	0.2	0.3	0.2	0.2	0.2
Subcooled	K	3	3	3	3	3

Typical Product:4500 Nm3/h YPO-4500 Liquefaction Oxygen Equipment

Output, purity and pressure

	Flow (Nm3/h)	Purity	Pressure MPa(G)	Subcooled (K)
LOX	4500 (g)	Same as the feed air	0.2	3

Description:

The low pressure nitrogen compressed through nitrogen compressor mixing with the reflux gas of liquefaction plant is compressed through the gas transmission nitrogen turbo-compressor. The compressed gas is divided into two streams. one stream is expanded by high temperature expander, and goes out of cold box after being rewarmed. The other one stream is boosted in series through the booster of the expander, and then it goes out of cold box with rewarmed through main heat expander after being expanded in the low temperature expander, and back to the inlet of circulating section of nitrogen turbo-compressor after being rewarmed in the main heat exchanger. Part nitrogen goes into the gas-liquid separator after being liquefied. The liquid nitrogen in the separator is subcooled in the liquid nitrogen subcooler, and then goes into the oxygen heat exchanger to cool oxygen, part of which is extracted and back to the main heat exchanger as reflux gas, and the rest liquid nitrogen goes out of heat exchanger and back to the inlet of circulating section of nitrogen turbo-compressor.